gnireelknarf

let me know what you think greetz Frank

cool track! thumbs up!

you can cut out some of the ulta low frequencies on the sylenth by setting a high pass eq at about 50 hz, that will make you able to pull up the volume a bit you should set the overall volume somewhat down before you do that and at the end of your producing cycle turn the volume up with a limiter on the master volume so it cannot clip, then you can do some tweaking, i dont know if you use dynamics on your master but it will make the track more dynamic like it says it is not about volume of your mixdown, remember that, when i like a sound i just pump up the volume. Better make sure the sound of your mixdown is ok en than at last put the volume of your mixdown up to a higher level, if you want to listen if your mix has to much bass or to low bass you have to play it almost silently to hear if some things come more to the front, if you can hear the low bass then in your mix, there is to much in it, and if you cannot hear anything of the bass there it is set to low. Not on headphones btw.

same as wtih the other track, very nice and cool production, i only would turn up the volume of the bassline a bit more

sounds nice to me, maybe turn the bassline a bit up

nice and dark, good trip!

thanks guys

cool track!

very cool track!

Hi there, I wanted to share my track for feedback, feel free to give comment. This is my first project using Reaper as a daw so i'm curious about your opinion on the track but also on the mix. greetz Frank