Jump to content

E-fence

Members
  • Posts

    13
  • Joined

  • Last visited

Reputation

1 Neutral
  1. looking the tascam usb 144 or 122, the emu 0202 or something basically something that will get the job done and wont break my wallet midi would be nice but not absolutely needed. only need 1-2 ins and outs
  2. sample it, steal it, pirate it, if its music for your own happiness who the cares. If your trying to get the track signed and your consered replace the sample with a royalty free sample or replace it with something you made yourself.
  3. roland mc-303 my first sequencer I bought fpr about $800 in '98 loved it for the first year and a half and then realised after getting into sampleing that it was a load of crap It tought me a shit load though
  4. I think we are all control freaks. Thats probaly part of what got us into this type of music production
  5. I was experimenting and thought to share. heres some patches I made. Alot of them are trance leads and just slightly different from each other http://www.snapdrive.net/files/8563/combinator.rar
  6. thought I'd try something I havnt done in a while and produce below 135 BPM's track is called BADBOY http://www.soundclick.com/bands/pagemusic.cfm?bandID=385875 dont know what style you would call it so??
  7. track is good the mixing and mastering need alot of work though
  8. thought I'd try something I havnt done in a while and produce below 135 BPM's track is called BADBOY http://www.soundclick.com/bands/pagemusic.cfm?bandID=385875 dont know what style you would call it so??
  9. you can create great sounds with reason it just takes more time, work and knowlege
  10. the mix down needs work and the arrangement doesnt flow as much as I like
  11. want a copy of this too
  12. for all these tpis and tricks I would suggest reason 3 users to make them a combinator patch for quick access creative techniques 1.multutiband compression -run signal to spider audio -run spider audio to 2 or more paramic EQ's or mclass EQ running parralel -run each of the EQ's to compression module(which ever compessor you preffer) -use each EQ to isolate certain frequency ranges -combine the audio from compressors with a mixer or another spider audio module Now you have compressors for specific frequency ranges that can be udjusted seperately 2.stereo offset(creates a stereo feild with out any molulation) -run signal to spider audio -run two lines of the the spider audio into delay units running parallel -set on delay to 1 ms and the other to 3-15 ms, set the feedback to 0, mix to 100% effected and one all right pan the other all left pan. -combine the audio from delays with a mixer(if doing this with mixer make sure you repan each channel) or another spider audio module. This effect creates a stereo feild that can be widened and narrowed by adding and subtracting ms from one of the delay. if your feild becomes too wide you can also turbn the panning a little closer to 12 o'clock EF heres some more 3.controlled delay feedback loop(warning my cause speaker/ear damage if not careful -start with a mixer and a delay or reverb(start with delay and once you get the hang of controling the feedback then try reverb) -run an audio source to the mixer that you want to effect(such as vocal sample) -run your delay to a spider audio -run one spider audio output to the return -run a second to a open channel of your mixer heres where it gets dangeress (what you are about to do is run the delay back into it self) -turn your aux up on the sample channel NOW BY TURNING UP THE AUX ON THE DELAY CHANNEL YOU WILL BE SENDING IT BACK TO IT SELF -TURN IT UP VERY SLIGHTLY UNTIL YOU CAN HERE IT FEEDING BACK INTO IT SELF -THERE GOING TO BE A POINT WHERE THE FEEDBACK WILL GET LOUDER AND LOUDER. BY TURNING THE AUX KNOB BACK TO ZERO IT WILL KILL THE FEEDBACK LOOP. -BY AUTOMATING PLAYING WITH THE AUX SEND YOU CAN GET SOME CRAZY FEEDBACK IN A SONG WITH OUT DESTROYING SPEAKERS 4.recreating a pattern controlled filter like rebirth 2.0 in reason i cant beleive i never thought of this. Ive made pattern controlled filters before but never tried to recreate a tb303, distort it and then run it through a pattern controlled filter with setting to match the rebirth PCF run audio source into evelope filter effect. attach matrix to the filter note on controls envelope/velocity controls cut off i have all the patterns from the PCF on rebith 2.0 and Im thinking about rewritting them into a matrix and saving every thing as a combo PCF effect
  13. whats up everyone been looking to get into something different and yesterday I decided it was psy-trance. I've been producing a variety of music for years but the last 5-6 has mostly been hardhouse and hard NRG. recently I've jhust not been uninsired and not impreesd with the scene. so to try to get my production juices flowing I thought I'd try something i've never really done
×
×
  • Create New...